Quote:
Originally Posted by fryer1979
I've got a slightly different question for you guys that have done this swap already. After the swap is done, how is the ride height for a full '73-'87 crossmember and control arms in comparrison to the original '63-'66 front end? Does the truck sit any higher or lower? Mostly I am just curious in a stock for stock contrast. Thanks
|
Back when I did mine, it did not change the height so that I noticed. I did not measure it to know for sure. I did not do the complete crossmember swap, i only did the spindle/rotor/caliper swap.
If the coil springs are the same, I mean the original ones were for a V8 and the swapped in ones were from a V8 truck (or 6 cyl/6cyl) the heights should be close not counting any amount of settling in the spring...