The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**robnolimit** · 10-08-2010, 03:57 PM

Good feedback, keep it coming. Those that know me, know that safety is a concern, and I tend to overbuild.
WvGearhead first off, you need to speek up more often. How about some picts. How are you getting your numbers? Are you using Suspension-Pro? You seem to be up on this stuff. Thats great. Your set-up seems to be pretty good, I'm guessing your tire is about 29" dia. thats puts your roll center a few inches above the axle center line (hieght). I would consider lowering it a bit, or at least allowing for an adjustment later, second set of forward holes. Some squat in a truck is good, to help with some weight transfer. Lets go over this on the forum so everyone can check out your work. How about shocks/springs?

10-08-2010, 03:57 PM	#131
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Make it handle Good feedback, keep it coming. Those that know me, know that safety is a concern, and I tend to overbuild. WvGearhead first off, you need to speek up more often. How about some picts. How are you getting your numbers? Are you using Suspension-Pro? You seem to be up on this stuff. Thats great. Your set-up seems to be pretty good, I'm guessing your tire is about 29" dia. thats puts your roll center a few inches above the axle center line (hieght). I would consider lowering it a bit, or at least allowing for an adjustment later, second set of forward holes. Some squat in a truck is good, to help with some weight transfer. Lets go over this on the forum so everyone can check out your work. How about shocks/springs?