The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project 67 DRGNWGN

**kev2809** · 11-29-2010, 09:39 PM

lol...na, i actually didnt snap any pics of the ass kickin to my face lol

it was too embarassing..

i do have some progress though! i finished up seam sealing the welds on the floor, will take a pic once i sand down the entire floor but thats at a later date. over the weekend i did some major sanding! sanded down the entire driver side quater past the doors, all the way around to the tail light area, and even removed the glass to get inside the window channel. im about 98% done sanding, then its on to a few coats of epoxy then body work. even grinding down some of the welds i had welded on last year..

11-29-2010, 09:39 PM	#250
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,141	Re: Project 67 DRGNWGN - 67 Burban!! lol...na, i actually didnt snap any pics of the ass kickin to my face lol it was too embarassing.. i do have some progress though! i finished up seam sealing the welds on the floor, will take a pic once i sand down the entire floor but thats at a later date. over the weekend i did some major sanding! sanded down the entire driver side quater past the doors, all the way around to the tail light area, and even removed the glass to get inside the window channel. im about 98% done sanding, then its on to a few coats of epoxy then body work. even grinding down some of the welds i had welded on last year.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 11-29-2010 at 09:45 PM.