The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

54 jimmy · 02-17-2011, 02:40 PM

i would like to make the harness a stand alone. so yes i want to thin the wires. i bought a ez wiring harness to run my carb motor and would like to use this harness with the factory tbi but stand alone. the 88 doesn't have a lock up converter. so i don't have to worry about that. as far a gauges i am running sunpro mechanical ones. my motor doesn't have a polution pump or that odd junk. i don't care if i have to leave the charcole canester or the egr that doesn't bother me. i want to do a easy simple cheap tbi swap.

02-17-2011, 02:40 PM	#6
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,183	Re: tbi fuel injection i would like to make the harness a stand alone. so yes i want to thin the wires. i bought a ez wiring harness to run my carb motor and would like to use this harness with the factory tbi but stand alone. the 88 doesn't have a lock up converter. so i don't have to worry about that. as far a gauges i am running sunpro mechanical ones. my motor doesn't have a polution pump or that odd junk. i don't care if i have to leave the charcole canester or the egr that doesn't bother me. i want to do a easy simple cheap tbi swap. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter) Last edited by 54 jimmy; 02-17-2011 at 05:46 PM.