Finally starting to get some new metal going in. I was starting to get tired of cutting and cutting, only to find more rust buried in the layers. I got enough of the B-pillar area rebuilt that tomorrow I'll throw some paint inside before I cover everything up with the new patch panels. There is some rust left above the bed floor, but I'll dig that out from the top side when I can pull the roll bar out of the way. Right now it has braces welded to it holding the windshield frame and firewall in place.
Also took an idea I saw in another build. I figure that dirt and water is going to get into the torsion boxes anyway, so I might as well give it a good way to get out. I punched some 2 1/4" holes and flared the edges by hand.