The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bobs409 · 03-22-2011, 06:32 PM

Woohoo! Found some decent sheetmetal at the EZ pull today.

I got the whole dash and firewall section! It was easier to cut that way and I only paid $30 for it. My handy dandy Harbor Freight battery powered sawzall did the trick.

I will probably remove the inner kick panels and the inside cowl area from this chunk and install into my cab. The firewall and the dash will also be removed but will be sold. All said and done, I'll end up making money on it.

03-22-2011, 06:32 PM	#24
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 69 Custom 30 wrecker restoration Woohoo! Found some decent sheetmetal at the EZ pull today. I got the whole dash and firewall section! It was easier to cut that way and I only paid $30 for it. My handy dandy Harbor Freight battery powered sawzall did the trick. I will probably remove the inner kick panels and the inside cowl area from this chunk and install into my cab. The firewall and the dash will also be removed but will be sold. All said and done, I'll end up making money on it. Attached Images __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10