|
Re: can you lay frame with a 15 inch wide rim
Quote:
Originally Posted by topher
really just interested could you ask him if the rear frame was narrowed to fit those tires or did they actually fit between the stock width frame and box sides ?
|
The frame was not narrowed. That truck is/was set-up very similar to how my RetroRod project was done.
Also.... that truck isn't really that low. That's where/when you'll really start noticing issues w/fitting all that rubber. It had standard c-notches installed into the frame & the rear housing wasn't riding inside the notched area. Both of my previous daily drivers w/c-notches had the rear housing tubes up into the notched area about 1" which would be the equivalent of about 8" rear drop.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|