Re: It runs, but.
U have to have a FEED and RETURN.
Even if regulator is on the rail, you have a return off that rail. if not on the rail then you have to have one in-line b/c the pump should be putting way more than 58PSI thru it.
You are flooding the motor with fuel, check the oil see if its gassy.
Also, if all that is in working order, and you are loosing pressure after prime or run, could be a leak injector.
__________________
71 Cheyenne C10 LWB cam'd 6.0/T56 Swap
Last edited by Shon; 05-05-2011 at 11:32 AM.
|