Last week I pulled the rear X-member out and built a compressor bracket between the frame rails. I also ran the wiring for the compressor and elec fan and hooked up the old switches, for now, to make some test runs. This week was spent splicing the newer door panels in. There were a few wires that were different, such as the red wire was pink on my 93, not a big deal but took more time to figure out. Also got the front end put back together and made a few laps around the neighborhood. When I was digging around in the part cab I found the head light switch on the floor under the wiring harness.
The next thing on the list is get the bed cut down to fit and get this thing put back together and put some miles on it.