|
Re: It runs, but.
So is the pressure still falling off quickly? If it is and you have no visible leaks, I would pull the fuel rail off of the intake, but leave the fuel lines connected. Then while holding the fuel rail up away from the intake, have someone turn the key to the run position to prime the fuel pump. DON'T START IT. then with pressure in the rails make sure no gas is leaking out of any of the injectors. If there is that will cause a hard start because its flooding the engine. If they're not leaking, while you have the rail off, it wouldn't hurt to go ahead and remove all the injectors and soak them over night in some Seafoam, just in case they may be sticking.
Posted via Mobile Device
|