Re: HEI with and without separate CDI box?
They fall right in with a lot of clearance from the firewall. Unless you have the motor mounts in the wrong spot during an engine swap.
If you're not racing, or have a high HP engine. Then a stock HEI without any boxes or fancy stuff will be just fine. Just make sure you have a dedicated 12v wire going to the distributor.
I have an MSD Pro Billet HEI... which has all the CD stuff in the module and also has a rev limiter too. All under the cap.
Gary
__________________
'cuz chicks dig scars...
My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.
The Rebuild of Creeping Death after the wreck
Quote:
Originally Posted by LONGHAIR
I would never rebuild a 305.
|
Quote:
Originally Posted by prostreetC-10
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
|
Quote:
Originally Posted by Marv D
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
|
Quote:
Originally Posted by cableguy0
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
|
|