The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 3 speed overdrive!!, now about getting it in.......

Gianyveedub · 06-23-2011, 03:59 AM

I made a bracket to hold my on/off button. It is not the greatest, but it will do. I used a spray on bedliner to coat the bare metal.

I didn't have a better place to put the relay, so I put it here.

If you need to see which screw has the wire attached (solenoid) here it is.

And I used a existing hole for the overdrive lockout.

06-23-2011, 03:59 AM	#55
Gianyveedub Registered User Join Date: Mar 2011 Location: Hollister, Ca Posts: 178	Re: 3 speed overdrive!!, now about getting it in....... I made a bracket to hold my on/off button. It is not the greatest, but it will do. I used a spray on bedliner to coat the bare metal. I didn't have a better place to put the relay, so I put it here. If you need to see which screw has the wire attached (solenoid) here it is. And I used a existing hole for the overdrive lockout. Last edited by Gianyveedub; 06-23-2011 at 04:00 AM.