The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

isaacf · 06-24-2011, 03:55 AM

i decided to change the intake gaskets last week and ended up firing it up and blew both head gaskets so i pulled the heads to find two pistons cracked in half and one cylinder wall had a few big crackes in it . my 202 heads are fine with no damage on them

this is another engine i just picked up with the heads completly rebulit and a new crane cam and lifters put in less than 500 miles ago. i paid 300 then cleaned it up

06-24-2011, 03:55 AM	#76
isaacf Registered User Join Date: Sep 2010 Location: portland oregon Posts: 108	Re: the 71 "break up" build i decided to change the intake gaskets last week and ended up firing it up and blew both head gaskets so i pulled the heads to find two pistons cracked in half and one cylinder wall had a few big crackes in it . my 202 heads are fine with no damage on them this is another engine i just picked up with the heads completly rebulit and a new crane cam and lifters put in less than 500 miles ago. i paid 300 then cleaned it up __________________ 1969 chevelle 350 numbers matching 1971 chevy lifted 4x4 (the break up build) http://67-72chevytrucks.com/vboard/s...d.php?t=423605 1993 subaru impreza 1969 blazer cst 8" lift Last edited by isaacf; 06-24-2011 at 03:57 AM.