|
Re: Boxing a 47-53 1/2-Tips, Parts
I did exactly what jimig1 said.. I used weld thru primer on the inner part of the frame rail, and primer then got some eastwood internal frame coating and hit it with that as well. You can prime the bigger part of the frame rail (vertical part across from where the boxing plate is going to go) that side won't get hot enough from the weld to do any damage to it, if you take it slow.
1. Primer big side of frame rail
2. Weld Thru Primer on top and bottom of frame rail
3. Weld
4. Internal frame coating all the frame rail
|