The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Post your best budget mods! ($50 or less)

frednoah · 07-17-2011, 06:22 PM

My new console:

I got tired of not having a place to sit a cold drink down while driving back and forth to physical therapy, so I began thinking about building myself a console. I took a bunch of measurements, made a pile of sketches, and finally settled on a design.

I've got about $35 in the whole thing, and about 2-3 hours of labor making it. Materials were:
2 pieces of 2ft square 1/2" pine (if memory serves...)
1 stick of 2"x2"x8' furring strip
3" hole saw
Package of small finishing nails
Some wood filler putty for the seams
Two plastic cup holder inserts like you'd see on boats
Free quart of black paint I got from a Glidden promo online

It is 12" wide, 14" long, and goes from 11"(at the seat) to 13" tall. Down the road I may pull it out and integrate a 10" subwoofer into the design, but just holding a drink and my phone will do for now.

07-17-2011, 06:22 PM	#23
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Post your best budget mods! ($50 or less) My new console: I got tired of not having a place to sit a cold drink down while driving back and forth to physical therapy, so I began thinking about building myself a console. I took a bunch of measurements, made a pile of sketches, and finally settled on a design. I've got about $35 in the whole thing, and about 2-3 hours of labor making it. Materials were: 2 pieces of 2ft square 1/2" pine (if memory serves...) 1 stick of 2"x2"x8' furring strip 3" hole saw Package of small finishing nails Some wood filler putty for the seams Two plastic cup holder inserts like you'd see on boats Free quart of black paint I got from a Glidden promo online It is 12" wide, 14" long, and goes from 11"(at the seat) to 13" tall. Down the road I may pull it out and integrate a 10" subwoofer into the design, but just holding a drink and my phone will do for now.