The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1967 C-10 LS POWERED Build

LSPWRD67CHEVY · 09-06-2011, 03:01 PM

The bottom end is gonna stay stock for now. The cam I went with is from cam motion. Its a custom grind 240/248 Duration 612/595 Lift on a 110 LSA RPM range is 3500-6500. i purchased some 650 lift springs to go with the cam. I'm going to run a carb intake as seen about with the LSX controller and Dynatech Headers 1 7/8 in. Primaries with a 3 in. Collector. Behind all that is a 400 turbo.

09-06-2011, 03:01 PM	#11
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build The bottom end is gonna stay stock for now. The cam I went with is from cam motion. Its a custom grind 240/248 Duration 612/595 Lift on a 110 LSA RPM range is 3500-6500. i purchased some 650 lift springs to go with the cam. I'm going to run a carb intake as seen about with the LSX controller and Dynatech Headers 1 7/8 in. Primaries with a 3 in. Collector. Behind all that is a 400 turbo.