Re: Axle Options
Quote:
Originally Posted by wade_ab
here is a quote from the article:
GM Hot cam, which had a 112-degree LSA and a lopey idle. It turned out that the first step up from stock-Crane's PN 1449551 with 210/218-degree duration at 0.050-inch tappet lift-was a real torque monster, churning out more peak and average lb-ft than any other cam tested.
Read more: http://www.hotrod.com/techarticles/e...#ixzz1dFVPeNKZ
after they did all their "mild mods" they were getting over 500 hp
|
210/218@.050 isn't so scary for towing in a 6.0L. Good read.
__________________
Steve
1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's
|