[hgs_notes]

The lower pads are rivited to the support. There are longer ones for the bottom also to fit the thicker 4 core radiators. Shorter ones for 2 and 3 core radiators. Top and bottom should match. If you need to have the longer ones you'll have to ask on the parts board. They are available occassionally and its where I got mine. The new ones can be bolted in using a small carriage bolt where the rivet was. Or if the radiator fits as is, just ignore it. Also, the longer lower pad mounts will require you to bend the lip of the support in that area back to make room. I cut mine and bent it, but the factory just grabbed that spot with a tool and bent it down flat and left it like that.