Quote:
Originally Posted by altownsend
1960 C-10 3/4 ton Step side
4 wheel drum brakes
I did not see options for the 1960. I want to get the least expensive conversion done for front and rear disc brakes, power steering, and power brakes. I plan to install disc brakes in the rear at a later time, so I want to convert with that in mine.
For now, I want to convert to front disc brakes. I need to know what year donor vehicles' parts will bolt on for the conversion. Please advise.
I want to go with power steering and power brakes on this 1960. Please advise what year donor vehicles will bolt on. The master cylinder on the 1960 has 3 bolts mounting it to the firewall. I notice that all of the other master cylinders have 4 bolts mounting the master cylinder to the firewall. Please advise a solution.
|
The only bolt on disc brake spindle for your 60-62 balljoints and outer tie rods,... are aftermarket conversion spindles for the 60-62 trucks.
Performance online sells them for $229.00 every day.
They also have 10% off until the end of the year.
Look here:
http://www.performanceonline.com/196...dle-Set-16683/