The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - ** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built.

Low Elco · 01-03-2012, 01:14 AM

Little tip, Drew... While not technically necessary, I like to wipe down between stages with a soapy rag. Also, knock your speed down from full while cutting the scratch out, to about 2/3 on the mid-cut, to about 1/3 on the final cut. You don't need a lot of the later stuff. A dab on the pad gets 'er done, and makes a lot less mess. Meguiars soft pads seem to help with swirls. Have fun!

01-03-2012, 01:14 AM	#2624
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Little tip, Drew... While not technically necessary, I like to wipe down between stages with a soapy rag. Also, knock your speed down from full while cutting the scratch out, to about 2/3 on the mid-cut, to about 1/3 on the final cut. You don't need a lot of the later stuff. A dab on the pad gets 'er done, and makes a lot less mess. Meguiars soft pads seem to help with swirls. Have fun! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!