The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Captainfab** · 01-12-2012, 12:08 AM

Well according to what I've found, the MA code shows it to be a 210hp 327 from a '67 Camaro. That will have small valve (1.74 intake, 1.5 exhaust) heads. I would definitely consider a better set of heads, such as the Vortec heads. And yes, if it is knocking, the bottom end likely needs rebuilt as well.

A 600 cfm carb will be sufficient. For an intake manifold, a Edelbrock Performer EPS or a Performer RPM will be a good match. A camshaft of a 262-268 version would be good

01-12-2012, 12:08 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Advice Needed: Rebuilding a 327 Well according to what I've found, the MA code shows it to be a 210hp 327 from a '67 Camaro. That will have small valve (1.74 intake, 1.5 exhaust) heads. I would definitely consider a better set of heads, such as the Vortec heads. And yes, if it is knocking, the bottom end likely needs rebuilt as well. A 600 cfm carb will be sufficient. For an intake manifold, a Edelbrock Performer EPS or a Performer RPM will be a good match. A camshaft of a 262-268 version would be good __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 01-12-2012 at 12:13 AM.