Re: Axle hitting crossmember
Is the crossmember on correctly. There is a spot on the x-member that is tapered to allow clearance for the joint...I found that out the hard way once. What condition are the rubber mounts on the x-member...maybe they have deteriorated enough to cause problems.
__________________
My Projects:
1960 GMC 1/2ton with 305 V6 (daily driver)
1963 Chevy 1/2ton 2wd...converting to 4x4
1967 Suburban 1/2ton 2wd
My Girlfriends Projects
1985 Chevy Suburban 3/4ton 4x4 with 6.2L diesel, 4" lift, converted to TH-400, Warn Premium manual hubs, & Wildcat 315/75/R16 tires. (daily driver)
1978 Camaro Type LT with a Marine 350 & vortec heads, Rochester Carb, & roller cam
1978 Camaro Z28
|