[Bobb]

Hy cahurst2001, you said the hazards work fine, so the wiring is okay. Since the circuit for the brake lights must pass through the turn signal switch, put the turn signal in right turn mode, step on the brake, and have an assistant check and see if you only have one brake light (left). If both brake lights are on then the turn signal switch is not making contact internaly, and is probably broken, If you only have one brake light (left) then turn on the ignition, if the right signal still does not flash, then power inside the turn signal switch is not being sent to the right turn signal connections inside the switch. Either way it looks like the turn signal switch might be the problem, hope that helps.