Quote:
Originally Posted by farmtrucks
Am I correct
4 wire cruise switch ---- TAC
Red - ------ ------- -12 volt
Blue - ------ ------ -14/cruise on
Green - ----------- -4/set-coast
Yellow - -------- -5/resume-accell
Then hook hot w/brake applied to - 6
|
If you're talking about the small wires coming off the actual switch inside the lever, then it's Blue- is the 12v ignition, Green- is On/Off, would go to pin #5 on the TAC, Red- is the Set/Coast, would go to pin #4, and Yellow- is Resume/Accel, would go to pin #14. And then you are correct, hook hot with brakes applied to pin #6.