The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TX10.5 · 03-21-2012, 10:40 PM

This was a big block truck with turbo400 and now has 350/turbo350 so it was setting a little high. I cut one coil off of springs which brought control arm geometry down back to normal and improved ride hight not sure if I can cut off another coil or half of coil to get it down a little lower ?

03-21-2012, 10:40 PM	#16
TX10.5 Registered User Join Date: Jan 2012 Location: Cypress, TX Posts: 48	Re: Saved A "Burb" This was a big block truck with turbo400 and now has 350/turbo350 so it was setting a little high. I cut one coil off of springs which brought control arm geometry down back to normal and improved ride hight not sure if I can cut off another coil or half of coil to get it down a little lower ? Attached Images __________________ 69 RS Camaro restored 68 Camaro convertible rusty field find 67 RS Camaro Outlaw 10.5 632FULTON 3stages Nitrous 69 Suburban 5.3l/4l60 cruzer Fords I own are for towing and getting to work only!!