[Atommik]

The brake pedal assembly looks to be from a older chevy, maybe a truck or van. I welded 2 cross braces that the brake booster will bolt thru into the pedal bracket. Its also bolted into the bottom edge of the dash. I then welded a couple of brackets from the lower dash to the brace that goes from the dash to the upper firewall. (Previous pics.)

The column was abount an inch short of perfect, so I recessed a small area in the firewall where the column comes out so it in effect,moves the column into the cab a little bit and lines up the factory mount holes with the mount holes for the brake assembly, which is now nicely braced and very solid.