Re: Project 78 High Sierra
Still clueless on what to do with the speedo after trolling the forum other then dealing with it.....
Took the lens off and while started adjusted the Volt meter needle and Oil Pressure...So now when i hit the gas it goes just to 60PSI and the Volts stay around 13...
Also replace the temp needle as it had an orange spot....
And installed a blue LED bulb in the wiper switch
Hit the hood with 2 more cans of primer and sanded the whole thing down with 320 grit paper...She is ready for some paint...
Now to wait until payday and go buy the ACE Enamel paint color match to cardinal red...Have to get my paint chip first too though
|