View Single Post
Old 05-07-2012, 11:33 PM   #2
wyomech
Registered User
 
wyomech's Avatar
 
Join Date: Oct 2009
Location: wheatland wyo
Posts: 103
Re: 63 Chevy SWB converting to 4x4

I then removed the front spring mounts and shackle hangers from the suburban and I was going to try and use the rear 52 inch springs under the front as it should give give me at least 4 inches of lift but discovered the springs were broken so I got some from a friend.I temporarily clamped them to the frame so I could set the front clip back on and make sure the axle was where I wanted it in the wheel opening
Attached Images
 
wyomech is offline   Reply With Quote