Quote:
Originally Posted by 68 C-10 KID
Posted via Mobile DeviceI do the same, switch over to the bias drags at the track when I don't like to run the quick time pros. Yes I have them on the rear also. I tried the dodge master. The pattern was to small to bolt up to the Factory studs. So I used my ccp disc disc master and took off the prop valve. The pedal feels a little soft. I think it's due to the bore being 1-1/4" and not the 1-1/8" like recommended.
|
I have the Dodge master new in the box . Mine has the stock disc drum master with factory prop valve . I also have =4 braided rear lines so it takes some fluid to get the rears activated . It works surprisingly well .