[>X<]

i have to sell my 454, it was supposed to go in the truck that i will build one day, but thats a long way off so i need to get rid of it and pay off s10 and college stuff and all. i am about to sell a ton of parts from a 3/4 ton so be on the lookout, i'm just doing it one at a time so i dont get anything mixed up.


oval port open chamber heads (***292) decked, 3 angle valve job

Comp 292 hyd. cam, lifters, springs, retainers.

weiland square port dual plane alum. intake( was going to get right one for it, but i was going to try this one first to see if the rumors are correct)

Block cecked fo cracks, etc, bored .30 over, honed, painted

10 1/4 TRW Forged pistons

Double rollertiming chain, Crank ground and degreed

oil pan, harmonic balancer, new rockers, bearins, chrome valve cover kit, timing chain cover, pointer

New High Perf. pushrods

chrome fuel pump block 0ff plate

All ARB polished stanless bolts, have ll the bolts to finish motor.

some pulleys and brackets from a 402 that i have.

my buddy's dad that built it has built plenty of motors, he built it for a 71 camaro w dana 60, tubbed, slicks, cage, etc, but found a780hp alum headed BB for a deal so i bought this motor. he said it should make 500 hp but that seems a little optimistic.

can get all #'s and pics tomorrow

$3000