Re: LS factory cruise control hook up
I have a 2005 LS2 with E40 computer DBW. Cruise does not work.
I think the problem is that the cruise is interlocked with the e-brake. The ECM has to see that the e-brake is off for the cruise to engage. (I know this is true on my 08 LS3). Problem is that the BCM reads the e-brake switch and puts the message on the low speed serial bus which the ECM reads.
(The same problem occurs for the case learn procedure. The TECH II has to see that the e-brake is on in this case for it to run the procedure.)
I am in the process of trying to get a BCM wired up with a toggle switch for the e-brake. No success yet.
Has anyone gotten cruise to work with DBW???
TR
|