Quote:
Originally Posted by jocko
yeah, that's a nice setup and good price. what gets riveted to what during the install?
|
Hi, The rivets go thru the inside door skin to the backing plate on the solenoid.
Need to drill 1/8 holes for the rivets
The backing plate sits on the top of the inner brace, and the end goes tight
to the door edge, and it will be exactly in the right position so no guess work positioning it.
Tools needed to install inside door componants, are phillips screwdriver, needle nose pliers, hand riveter, 1/8 drill.
Hope this helps any other questions please feel free to ask.
Thanks