The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Low Elco · 08-24-2012, 10:21 AM

SHOP ENVY! looks like good progress! If you're bucks down and have a welder, do a pipe notch, nuthin to it. Get some 3/4 ton springs from the salvage and cut 1 1/2 coil. Jeep springs have no load cap, but will get it down in the rear, and blocks are easy to fab. Bolts are 36 bux. Use 73-87 spindles from summit or somewhere cheap and you in bidness! Keep the faith and just do one thing every day, no matter how small. You'll be shocked how you boogie along.
Posted via Mobile Device

08-24-2012, 10:21 AM	#35
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Time Machine SHOP ENVY! looks like good progress! If you're bucks down and have a welder, do a pipe notch, nuthin to it. Get some 3/4 ton springs from the salvage and cut 1 1/2 coil. Jeep springs have no load cap, but will get it down in the rear, and blocks are easy to fab. Bolts are 36 bux. Use 73-87 spindles from summit or somewhere cheap and you in bidness! Keep the faith and just do one thing every day, no matter how small. You'll be shocked how you boogie along. Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!