|
Re: Dyno'ed 768hp 1305ftlbs & ran a 10.99@122
At your ride height, can you give us the following:
Axle center height
Height of the lowest hole for all four rod ends (front/rear hole for upper and lower bars)
What is the spacing for each hole (5/8" centers?)
Length of both upper and lower arms
My 4-link is set long and low. 5" off the ground and 60ish inches.
__________________
------Motor---------------Bottle
60'---1.53---------------1.41
1/8---6.58 @ 105.92----5.87 @ 118.41
1/4---10.38 @ 126.97----9.24 @ 142.49
|