The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

eagleuh1 · 11-29-2012, 12:34 AM

Thanks Justin. I thought I'd seen lowering spindles for 3/4 ton where you just change out ball joints and outer tie rod ends.

11-29-2012, 12:34 AM	#198
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: CPP Drop Spindle Special Thanks Justin. I thought I'd seen lowering spindles for 3/4 ton where you just change out ball joints and outer tie rod ends.