Quote:
Originally Posted by jonny..2008
there are more guys here who are more knowledgeable than i.
BUT i did have to switch the upper and lower ball to get '77 spindles on.
dont forget to check lug nut sizes too. i missed that.
also check tie rod end taper for disc spindles. i changed them 'cause they were cheap (bought 77 ones to match the spindles) but not sure if the taper is the same. i know the adjuster is different between 69 and 77.
|
Don't cut your self short. You have to know what you are doing, you owned a chevrolet don't you. Ha Ha.