|
Re: Project Family Chummins
Quote:
Originally Posted by jbclassix
Can you use the GM sensors in the Cummins for oil, temp, and fuel? I can see the crank sensor being an issue for RPM due to pulse width. All that stuff is Way down on my list.  |
Yes you can use the GM sensor in the 5.9. His engine should be pipe threads so as long as the GM OP sensor is 1/8" pipe, it'll screw in. Just beware that the OE type sensors can fail over time due to the higher oil pressure created from these engines. If the GM fitting is metric, you can get adaptive fittings from Tompkins.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project
Tired of spark plugs? Check this out.
|