|
Re: Toro Flow Diesel Engine & Trans
There were a few plates to bolt the toroflow crossmember to the stock frame and the transmission mounts slid in the frame and crudely bolted on. Unfortunately, the previous owner welded the front plates to my frame so I can't include those, basically a piece of 1/4" x 6" strap bent in a 90* to support the crossmember. The engine isn't any wider than a regular small block but some work would be needed to mount the engine crossmember.
I can get some pictures of the mounts this weekend as I'm heading down to where the motor is stored.
__________________
Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck"
70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc
68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac"
63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car"
53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon”
30 Model A 16 Focus ST
|