Quote:
Originally Posted by Captainfab
Did you check to see if the shaft is rotated as to engage the parking brake function of the caliper. If not you might try turning the shaft coming out of the back of the caliper. A box end wrench or a deep socket should work to grab it. I just don't remember what size off hand.
|
The parking brake is not engaged. The caliper piston is all the way back. The rotor will not fit with the brake pads installed. My rotors are 1.29" thick. Have you ever heard of this issue before? What is the inside width of your calipers and how thick are the brake pads you are using?
Posted via Mobile Device