The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Super73 · 02-01-2013, 01:34 AM

Aaron, play around with launch technique. Some times off idle to wide open transitions cut better 60's than stalling up on the converter as far as possible.

Put the n20 kit on a WOT switch, leave off idle and let it rip. shutting off right after the stripe and coast to a stop. Pull a plug and put a replacement in. Cut it open in the pits and take a good look at it. Adjust AFR as needed.
Posted via Mobile Device

02-01-2013, 01:34 AM	#13
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: 1.77 60ft Aaron, play around with launch technique. Some times off idle to wide open transitions cut better 60's than stalling up on the converter as far as possible. Put the n20 kit on a WOT switch, leave off idle and let it rip. shutting off right after the stripe and coast to a stop. Pull a plug and put a replacement in. Cut it open in the pits and take a good look at it. Adjust AFR as needed. Posted via Mobile Device __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49