Re: '66 Longbed 327 w/AC project
I took the panel back out and put some insulation on the back side of it, and hung it back up with clamps. I lined it up as close as it looks it could be, but i will say that it looks like there isn't a lot of overlap on the metal where the window will be cut, especially on the lower corners. I'll look at it some more before tack welding it in and making my way around. looking down in some of the pics into the empty area of the C pillar, which is usually a sound amplifier and echo area, this setup should quiet that down behind your head quite a bit.
|