|
Re: 1951 Chevy / C4
Its not all that bad really. I have a 94 irs thats already narrowed down to 54", the half shafts are about 70 bucks each to shorten and thats all i use from the stock stuff. The steering arm is cut down and rethreaded, or new links are made with chrome moly links and heim joints. The lower links are same except normally use poly bushing ends to quiet the ride a tiny bit.
I also plan to narrow the rails from the cab back a little so the side links can still be mounted similar to how you have them now on the stock width setup.
Posted via Mobile Device
__________________
91 s10 - bagged bodydropped 4", 350/700R4, narrowed reared, cantilever rear air bag setup
1951 chevy 3100 - in build/acquiring parts process. Have full C4 Corvette suspension front and rear, tpi 350, 700r4, 18" torque thrust II wheels
|