[Robznob11]

well I have sun pro mechanical gauges. I used a hose connector in my top radiator hose to put the temp sender, got it off ebay cheap and already was tapped for sender. I broke off the oe oil sender at the back of the manifold and tapped it for the oil gauge hose, and the super sunpro super tach is a programmable model that will work for 2 4 6 or 8 cyl so you can set it and hook it directly to the puter ouput. no speedo or fuel gauge yet but im thinking I may go with a gps speedo for easy no wire hook up and im still trying to figure out the fuel. well I really have not messed with it much but I know that you can use an ohm meter and check the range of the stock sender then just buy a gauge for that range.