|
Re: The Official John Lee Jr Thread
Quote:
Originally Posted by aggie91
Personally I like the way Sharps40 hooked up his 12si. I did it the same exact way in 1986 when I swapped my altenator and put in a HEI for my six. It worked flawlessly till 1993 when I quit using it for a driver. It sat till 1998, and still worked fine when I fired it back up after sitting for so long. For the HEI, I took out the orginal resistance wire from the firewall plug above the motor and replaced it with a 12 ga regular wire and hooked it straight to the HEI terminal. Worked great.
|
HEI is on the way and thats how I plan to plumb the coil, a new wire directly thru the bulkhead connector. I have a couple spare connectors case I damage the one on the resister wire now.
Last edited by Sharps40; 04-09-2013 at 11:48 AM.
|