Re: Make it handle
Alright my new tires came in and I got them mounted. I am probably going to lower the front another 1/2 inch or so to see if that will bring the upper a-arm back into a better position. Then off the the alignment shop I have them setup for tomorrow after work. Currently visually it looks like my camber is out of wack the top seems too far in. I will get them my specs and go from there.
After I get this all back home and where it needs to be I will get some more measurements. I would really like to understand this and get things to where it feels right.
I am still struggling with moving the outer tie rod piviot to the bottom of the arm that still seems backwards...
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
|