The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 Electric speedo

67c10rustbuket · 05-25-2013, 12:20 AM

1. Speedo box installs flush with the offset edge on the rear tin and in the holes mentioned in the plate.

2. Install two bottom box retaining screws.

3. Move to the top of the box and center punch and drill one more .125" hole and install screw.

4. volt /temp gauges reinstalled in original holes with the 3, original 1/4" hex head screws.

5. Pic of box installed..

05-25-2013, 12:20 AM	#181
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,807	Re: 67-72 Electric speedo 1. Speedo box installs flush with the offset edge on the rear tin and in the holes mentioned in the plate. 2. Install two bottom box retaining screws. 3. Move to the top of the box and center punch and drill one more .125" hole and install screw. 4. volt /temp gauges reinstalled in original holes with the 3, original 1/4" hex head screws. 5. Pic of box installed.. Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car