Re: 67-72 Electric speedo
1. Speedo box installs flush with the offset edge on the rear tin and in the holes mentioned in the plate.
2. Install two bottom box retaining screws.
3. Move to the top of the box and center punch and drill one more .125" hole and install screw.
4. volt /temp gauges reinstalled in original holes with the 3, original 1/4" hex head screws.
5. Pic of box installed..
__________________
Dan <---(my name)
67 SWB C10 project "GEORGIA"- 59 Brookwood 2dr wag...Next project- 03 Tahoe 4x4 5.3 family ride- 07 Hondur Accord, commuter car
|