|
Re: 1963 C-10 in NC
Heres a few pic of where I'm at with the clutch system. I need to file a little more around where the clutch fork access is. The new fork is just a hair thicker than the stock one was. This is a 64 Chevy c-10 v8 truck bellhousing # 3815891. Has many other applications, but this is what it came from. I had to machine down the thick boss in the 9 o'clock position to the same height as the boss in the 11 o'clock position to use this slave assembly. It can be used without the machine work, but then you have to use a spacer and shorten the pushrod. I opted to just have it machined. Cleaned up the bellhousing, chased the threads, rust prevention treatment followed by a few coats of high temp aluminum paint. I need to get a new fork boot from NAPA tomorrow and finish the final filing for the clutch fork and it should be done.
|