The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

timmytimm3 · 07-08-2013, 09:34 AM

Finally some real updates. I got my Porterbuilt order on Monday and took the rest of the week off to get everything cleaned up and in etch primer. I spent a lot of time cleaning and sanding all the edges down.

This is the first "version 4" C4 dropmember.

Parts cleaned and hung up

Etch Primed

I had the wrong instructions for the notch location and had to move it back 3/4" of an inch. Not a big deal to fill in.

07-08-2013, 09:34 AM	#22
timmytimm3 Registered User Join Date: Apr 2012 Location: CT Posts: 265	Re: Project "Full Circle" 66 C10 Finally some real updates. I got my Porterbuilt order on Monday and took the rest of the week off to get everything cleaned up and in etch primer. I spent a lot of time cleaning and sanding all the edges down. This is the first "version 4" C4 dropmember. Parts cleaned and hung up Etch Primed I had the wrong instructions for the notch location and had to move it back 3/4" of an inch. Not a big deal to fill in. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad Last edited by timmytimm3; 07-09-2013 at 09:50 AM.