The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TATTOO2131 · 08-16-2013, 11:41 PM

Ok, got the old front end out and the 2001 Crown vic front end under the chasis. Overall it lowered the front end 5 inches which will match the drop I am going to do on the rear. All I had to do at this point is add in some 3x6 stock to widen the frame. There will be a little frame mod behind where the rear supports attach to the frame. At this point it appears it is going to be a pretty easy swap, of course with the usual hicups. Below are pics showing progress and will continue to update this thread showing progress. Enjoy.

08-16-2013, 11:41 PM	#1
TATTOO2131 Registered User Join Date: Jul 2013 Location: brookings Posts: 52	65 panel crown vic front end swap update Ok, got the old front end out and the 2001 Crown vic front end under the chasis. Overall it lowered the front end 5 inches which will match the drop I am going to do on the rear. All I had to do at this point is add in some 3x6 stock to widen the frame. There will be a little frame mod behind where the rear supports attach to the frame. At this point it appears it is going to be a pretty easy swap, of course with the usual hicups. Below are pics showing progress and will continue to update this thread showing progress. Enjoy.